great stuff; adheres to more surfaces than any product I've had

My termite bonding company needed to treat the foundation. To treat the crawl space, they needed to poke a hole in my liner every 1 - 2 feet. This left me with 175 - 200 holes to patch in my 20 mil liner. Having applied the tape to about half of the holes, I have found this to be an excellent product. Very sticky and the edges stick very good. I am cutting a piece 2 - 4 inches long and centering it over the hole. I have also patched some seams that have come loose over 8 years. Perfect for my job.

Great product. Excellent adhesion yet is removable/reworkable. Aside from the obvious use on long seams, I used multiple small strips to cover both inside and outside corners by overlapping in several different directions.

I was given a quote of $4500. to install a vapor barrier in a 35ft.x45ft. crawlspace, so I decided to try to do it myself. I found crawlspace repair .com on the internet. I decided to use the 12mil. vapor barrier instead of the 6mil. that the quote was for. It was not hard to install, if fact it only took a few days by myself. The end result looks very professional and total cost was less than $1000. This is an excellent product and I would recommend it to all.

The foundation pins worked great. I installed one pin every two feet along the perimeter wall and within two inches of every corner. Three pins were installed on each 8"x16" cinder block pier. They give a nice professional finished appearance.