We use this product on most of our encapsulation projects and it's been great everytime 👍

Vapor barrier in the house was put in by the builder with 6 mill black plastic 28yrs ago, it was the usual shoddy job done by the builder, Last year noticed water pooling in the front area of the crawlspace, home is built on a sloping hill from front to back, front side crawlspace about 3 ft back side about 5 1/2 ft. Water was coming in from footer and under the footer, dug a french drain inside the crawlspace along the front wall and a sump pit with pump problem fixed. Decided to encapsulate the entire 1,800 ft crawlspace with 12 mill Guardianliner. This product is amazing extremely strong easy to work with, just measured and cut the pieces on the driveway and installed , used the foundation tape which has a excellent bond, I used foam board on all the walls and adhered with a strong water resistant epoxy. Overlapped 1 to 2 ft and tapped with the waterproof seam tape. The job turned out excellent, now understand I'm 64yrs old and had some great help from my college graduate daughter, but it did take about 5 months to complete, included running additional wiring for lightning and french drain and pump plumbing. however the end results looks like a NASA clean room. Humidity level before project was 75 to 80 percent after completion 45 to 50 percent and this is with a Dehumidifier that was made for a basement, it barely runs because the crawlspace is sealed off however still enough air for furnace to run. This company offers the best products made for the job do it right the 1st time and never worry about it again.

Good quality, quick service and if problem occurs they are on top quick to meet your needs

My crawlspace is now awesome with this vapor barrier installed. Customer service was excellent dealing with a minor issue I had. I would definitely recommend this product and company.

The GuardianLiner worked perfectly and exceeded expectations. It was easy to install and is thick enough to work great for a rather rough dirt floor and walls. Cutting was easier with a sharp knife, and required a few blade changes during install.

I'd definitely use this product again!