opted for the 12 mil guardian liner due to cost and it was on sale. was impressed with the thickness-yet very easy to cut. slightly difficult to work with in my tight crawlspace when spreading out and working out wrinkles. since I will not be entering crawlspace except to do maintenance--felt the thinner product was ok. In hindsight, if the area was higher traffic-would opt for the 20mil..after finishing the project, noticed several areas where small sharp objects were making indentations--not coming through..but since I wont be going in there--not an issue...overall--apples to oranges compared to the ancient plastic in there before.

Some parts of my job was over sand and some areas were hardend clay. There was also an area of old block footing with some jagged edges, so I decided to use strips of 12 mill on top of the blocks for a second layer of defence. Over all I've been crawling repedly over the plastic fixing various neglected issues due to lack of motivation to crawl around on dirt with spiders and centapieds. While the sand areas are easier on the knees, even the hard jagged edges of the clay have proven to be problem free from puncture. The house now smells better and the humidity is in check!!!

I used this vapor barrier for the foundation walls and pillars. It is much easier to cut than the thicker equivalent for ground use, which I also have. This is the same as the ground barrier, just a little thinner. They have both done an outstanding job, and now I'm waiting for the next few months to see how well they keep the moisture out of the crawl space. So far, everything is dry.

Your 12 mil. Vapor barrier is a very good product. Should hold up for a lifetime. Thsnks for your rapid delivery.

Product was as described and worked perfectly in our installation. Happy with the product.