This waterproof seam tape is used to seal the seams of your crawl space vapor barrier. It comes in rolls 4? x 187' (compare to rolls at only 108') and is white to match the SilverBack™ and GuardianLiner™ barriers. This product, when installed correctly, will give you a water proof seal at the seams. In very wet conditions it is recommended to use the Foundation Seal Tape™ under the seam to give an extra layer of protection. This tape is the perfect thickness for this application allowing proper...

Foundation Seal Tape (FST) is used to seal the crawl space vapor barrier to the foundation wall. When installed to a dry, clean (the concrete must be brushed off to remove loose debris) foundation wall the bond is good enough to hold the SilverBack™ to the wall temporarily (several hours/days) until the Foundation Pins are installed. If the foundation wall is wet in the area it will be installed and it will not bond then a polyurethane caulk must be used. This tape is 1.5" x 108' and has a...

The Foundation Pins™ are used to permanently secure theSilverBack™ vapor barrier and ALL other liners to the foundation wall. These pins are inserted into a 1/4" hole drilled by a hammer drill. They are to be installed every two foot and are made of heavy gauge white plastic. These pins come in packs of 100 & 1000 pieces and are required for a lasting bond to the foundation wall. The heads of these pins will not break off nor will the pin come out of the hole as with other pins on the market....