Questions/Tech Support? Call 864-223-7800 / M-F 8.30am-5pmFree Shipping over $200 for lower 48 states click for more details
CONTRACTORS/VOLUME BUYERS CALL 864-223-7802CONTRACTOR ORDER FORM
Your cart is empty!
Use this page to order multiple items at once by entering the quantity you want for each item and adding them all to the cart.
This tape is used to seal the seams of the crawl space vapor barrier. It comes in 4" x 187' rolls (compare to rolls at only 108') and is white to match all of the vapor barriers we offer. This product, when installed correctly, will give...
The Foundation Pins™ are used to permanently secure the vapor barrier™ to the foundation wall. These pins are inserted into a 1/4" hole drilled by a hammer drill. They are to be installed every two foot, two in each corner and anywhere is cut...
These plastic insulation pins are used to mechanically fasten rigid foam board to the foundation wall. This is to be used prior to installing your crawl space vapor barrier, and is not intended to be used on the vapor barrier itself. Requires...
Condensation Pump Product LinkHang Kit Product LinkFan Pack Product Link The Moisture Medic® crawl space dehumidifier is the newest generation of moisture management equipment available to the public. 70 Pint Moisture Medic®This crawl space...
Remote digital control of all AprilAire dehumidifiers. More info here- AprilAire Dehumidifier Control ...
Model LCU-20ST A condensation pump is a small pump that helps pump water from a dehumidifier to a sump pump, waste line or other desired location. This pump is made by Liberty Pumps and is supplied with a 20' drain hose. The maximum height it can...
20 Mil Reinforced Vapor Barrier for Crawl Space Encapsulation® The 20 Mil SilverBack® is made from 100% virgin polyethylene resin and reinforced with a 1000 denier polyester cord. This crawl space vapor barrier is idea for use on the crawl space...
NEW Product Technology The SilverBack® HS's technology comes from 60 years of outdoor environmental strength testing and is a premium engineered vapor barrier. With 100% of the surface protected by reinforcement made from strengthened polyethylene...
This universal check valve will allow sand, water, mud, and some small solids to flow in just one direction. Unlike many of our competitors, this valve has stainless steel clamps and fasteners, strong and durable ABS body, and the most durable...
Use with InstaDry® Sump Kit™ to prevent smaller drainage rock from entering the basin. For use with sandy soils and pea stone.
The InstaDry® Drainage System is available in 50' and 165' rolls. Water permeable fabric allows the water in and keeps the dirt and mud out. Use IDS to replace traditional methods of removing standing water from your crawl space. Drain rock...
Hanging kit for all AprilAire® and Moisture Medic® Dehumidifiers. This product allows you to hang your crawl space dehumidifier from the crawl space ceiling. this will keep the dehumidifier off the floor, level and protected in the event of a...
S86WMUPR-Thermostat & Wireless Dehumidifier Controller The S86WMUPR is a wi-fi thermostat controller that can be programmed or used as is without programing straight out of the box with features like 2H/2C Heat/Cool Stages or 4H/2C...
Raise your crawl space dehumidifier with either a set of 3" risers or a set of 5" plus 3" risers. 3" riser sets come with four risers total for each footing of the crawl space dehumidifier. Our set of 5" risers with 3" risers come with eight total...
This Air Support™ is used with our Moisture Medic® dehumidifiers to increase air flow in the crawl space, which makes the crawl space dehumidifier far more efficient and productive. The Air Support™ will allow the Moisture Medic® to dehumidify...
This dehumidistat is a key element in all moisture management plans outside of just plugging in your dehumidifier. The unit acts as a switch, turning power on and off to a dehumidifier and suppliment fans as the humidity rises and falls. It allows...